Repair Office 2010 in Windows for Different Kind of Errors

Repair Office 2010 in Windows for a Different Kinds of ErrorsWindows 10 is through the use of its built-in Repair option, accessible through the Control Panel.

This will help resolve Word, Excel and other similar applications that are having problems after certain files have been deleted or during the troubleshooting process when a crash happens.

Recommended: Driver Updater – Update Drivers Automatically. Trusted by Millions

Steps to Fix Office 2010 Not Working Error

1. Go To Control Panel
2. View by Small Items.
3. Double-click on Programs and Features.
4. Select Microsoft Office 2010 in that window.
5. Then you will see a Change label option at the top.
6. Click it.
7. Now several options like “Add or Remove features” etc will be available.
8. Now select the “Repair” option and click Continue.
9. Office 2010 starts to repair itself automatically.

Control Panel

Clean Boot Solution

Sometimes even the problem-solving programs may not work. In such cases, you need to start Windows in clean boot mode to eliminate all errors possible. Then check if you can work with office applications. This can be done by the utility called “MSConfig”.

1. Press the Win + R button and type “MSConfig” without quotes.
2. The System Configuration window will open.
3. There you can find the “Diagnostic startup” option under the General tab.
4. This will load only basic devices and services only.
5. Click Apply and restart your PC.
6. Now if Office 2010 applications are working properly, then the problem is with one of the non-Microsoft services.

If Office 2010 is not working in Windows 10, there may be several different errors that can occur during this process. For example, your computer may crash every time an Outlook, Word or Excel window pops up,

it could freeze constantly and lose functionality sometimes as well, not respond to the mouse and keyboard anymore or take a really long time to load things up. Windows 10 can also be problematic when trying to install it for the first time on your PC too.

The causes can be many. Some of them are like these –

1. Corrupt installation file of Office 2010 software.
2. Registry items of Office 2010 may get corrupted due to a change like uninstall or install.
3. Trojans, malware, viruses may have infected your PC and corrupted your Office 2010 files.
4. Another Windows 10 program might have deleted some of the Office 2010 files.
5. Using an older version of a cleaning utility like CCleaner to clean unused registry items might have removed some wanted registry entries.

The solution to this error code, which we will tell you how to fix in just a minute, is to repair the corrupt registry entries associated with Error 2908. This can be done by pressing Win+R and typing “Regedit” which will open right up into the Registry, where you access the items causing the error 2908 and then attempt to fix them.

You may want to do a full anti-virus scan, update PC drivers, install your recent Office 2010 updates, clean out system junk using the Disk cleanup feature provided in Windows and/or start fresh by doing a system refresh.

“We’ve noticed a problem,” the program’s message box says, “and we’re not sure what caused it. If you like, you can send us more details about how this happened. For example, try to open a document.

” To send additional information to Microsoft in this type of error message without losing any important data that is currently opened in Word, please follow these steps.

For this kind of problem, you might try several things: Try opening the Office application in Control Panel and see if you can repair it from there. You might also want to contact your technical support team as they have often had a few tricks up their sleeve to get the software back on track.

Read also: Fixes for Bluetooth Keyboard not working

How to Repair Office 2010 when you have Error Code 1935.

When installing an application you need to make sure you don’t have any leftover entries in the registry which might slow down the process. There are some extensions like Microsoft Office that, when uninstalled and re-installed, can cause trouble because of leftovers in the registry. One could get errors such as.

Microsoft Office Professional Plus 2010 encountered an error during setup.

Error 1935. An error occurred during the installation of assembly component {89EDD3A9-944B-3257-8484-D6EB6A00DDF5}. HRESULT: 0x800736FD”

The solution to this error is to clean the registry of your computer before re-installing Microsoft Office on it and then restarting the PC. After you do that, try to install Office again.

In these cases, the only hope is to manually fix the corrupted registry entries. If the SFC scan reports an error like this –

Windows Resource Protection shut down because it could not start the repair service

HKLM\Software\Microsoft\Windows\CurrentVersion\Component Based Servicing\Version or subfolder in WinSxS.

The following steps may be followed to repair Office 2010.

1. Open the registry and navigate to the following registry entry.

HKLM\Software\Microsoft\Windows\CurrentVersion\Component Based Servicing\Version.

2. Next run the “Readiness Tool“.

( Note: For Windows 10, 8.1, 8 you can use the Deployment Image Servicing and Management (DISM) tool.  Type the following command in the elevated command prompt or with Administrator privileges, and then press Enter.)

DISM creates a log file that captures any issues or fixes it has made to Windows. The log file stores everything DISM has done, which can be helpful when there are errors with DISM. The destination folder is in the WINDOWS directory.

Follow the instructions below on how to use the tool to search your computer for corruptions in the registry:

3. If that tool doesn’t work, then you have to manually correct the corrupted Version key.

CheckSur.log

4. First make sure the following key is available in the Windows registry.
HKLM\Software\Microsoft\Windows\CurrentVersion\Component Based Servicing\Version

On the right-hand side, you have several registry entries.
One of them refers to the {TrustedInstallerId} which has a value corresponding to your Office 2010 version.

The following are some examples.

6.0.6001.18000
6.1.7600.16385

Windows Registry Solution To Repair Office 2010 in Win 10

5. Once you know the {TrustedInstallerId}, using File Explorer navigate to the following folder.

C:\Windows\WinSxS

Under this, there will be sub-folders like –

x86_microsoft-windows-servicingstack_31bf3856ad364e35_{TrustedInstaller ID} (if you have system 32bit)

amd64_microsoft-windows-servicingstack_31bf3856ad364e35_{TrustedInstaller ID} (if you have system 64bit)

6. Write the name of this folder somewhere or paste it in a notepad.
7. Now go to the following key in your Windows registry.

HKLM\Software\Microsoft\Windows\CurrentVersion\Component Based Servicing

8. Take ownership of this key and add your Microsoft user account to have full control.
9. Under this key, create a “Version” subkey.
10. Now create a registry entry on the right-hand side with the following items

Name = {TrustedInstaller ID}
Data = %SystemRoot%\WinSxS\{identified folder in point 5}

11. Now remove your permissions for the CBS key and restore ownership back to “NT Service\TrustedInstaller”.

12. Now run the “Readiness Tool”. In the log file created, see if any errors are created.

Windows Registry Solution To Repair Office 2010 in Win 10 5. Once you know the {TrustedInstallerId}, using File Explorer navigate the following folder. C:\Windows\WinSxS Under this there will be sub-folders like – x86_microsoft-windows-servicingstack_31bf3856ad364e35_{TrustedInstaller ID} (if you have system 32bit) amd64_microsoft-windows-servicingstack_31bf3856ad364e35_{TrustedInstaller ID} (if you have system 64bit) 6. Write the name of this folder somewhere or paste it into a notepad. 7. Now go to the following key in your Windows registry. HKLM\Software\Microsoft\Windows\CurrentVersion\Component Based Servicing 8. Take ownership of this key and add your Microsoft user account to have full control. 9. Under this key, create a “Version” subkey. 10. Now create a registry entry on the right-hand side with the following items Name = {TrustedInstaller ID} Data = %SystemRoot%\WinSxS\{identified folder in point 5} 11. Now remove your permissions for the CBS key and restore ownership back to “NT Service\TrustedInstaller”. 12. Now run the “Readiness Tool”. In the log file created, see if any errors are created.

13. Try to fix those errors and your Office 2010 should start working again in Windows 10.

Conclusion

Best Tool: PC Repair – Easy Way to Repair Your PC Issues.

If Office 2010 or its sub-components aren’t working, there can be many reasons for this. The above problems mentioned are some of them.

Most of the time, the repair feature of Office 2010 which is also available in Windows 10 should fix these issues. If this fixing functionality works too slowly or is unable to repair the problem, then you may need to try other alternatives.